Lennox iComfort S30 User Manual page 6

There are three fan modes of operation, which are auto, on and circulate.
Pressing on the fan icon will allow selection of the desired fan mode.
Table 3. Fan Operation
Fan Icon
When selecting schedules, the available options are schedule IQ, summer,
winter, spring/fall and save energy. Schedules are all predefined and can be
changed or renamed by selecting edit schedules.
Schedule IQ - This schedule operates in heat / cool mode and answering a few
simple questions will allow the system to know how to set the temperature for
the home based on time settings.
By default there are two time and temperature settings which can be adjusted
using the edit schedules option.
@ home day - default time is 7:00AM with a low temperature setting of 67°F
and high temperature setting of 80°F.
@ home night - default time is 11:00PM with a low temperature setting of 66°F
and high temperature setting of 84°F.
Fan Operation
Fan Mode Mode Description
Fan is NOT following the schedule
ON and runs continuously until it is
changed from the selected mode.
Fan will follow the fan setting in the
AUTO
selected schedule.
Fan is following schedule and cy­
cles during periods of equipment
CIRCULATE
inactivity. Circulate run time is de­
pendent on user settings.
Schedules
away - Smart Away is used to set the temperature while the home is
unoccupied. Default low temperature setting of 62°F and high temperature
setting of 85°F.
Temperatures for "home day", "home night" and "away" can be adjusted by
sliding the low and high temperature circle left or right on the slider.
Figure 6. Set Schedule Time Screen
For each time setting, a specific fan operation can be set as well. Options are
on, auto and circulate. Other options are rename the schedule and restore
defaults. Press the home icon to exit the screen.
J. Indicates the actual mode of operation the system is running.
K. This is the "inside" room temperature.
NOTE - If the "feels like" option is enabled, feels like will appear above the
temperature. This feature can be enabled in the user settings.
L. This icon and number represents the humidity level inside the home at the
thermostat location only. This will only be displayed if enabled in the user
settings for display. The rain drop will be displayed as different levels based
on humidity percentage are detected in the home.
6
set time
5 59
6 00 AM
PM
01
7
done
cancel