Settings; Wi-Fi - Lennox iComfort S30 User Manual

M.Items that may appear in this area of the screen are as follows:
Is displayed when a manual temperature override
has been set. Press cancel to return to the cur­
rent schedule.
Indicates the system is set to "Perfect Temp".
Allows the current temperature to reach desired
setpoint without system operation by "coasting" to
the set cooling setpoint. Press cancel to return to
the current schedule.
Indicates the system is set to "Perfect Temp".
Allows the current temperature to reach desired
setpoint without system operation by "coasting"
to the set heating setpoint. Press cancel to re­
turn to the current schedule
N. This area of the screen will display either the outdoor temperature or weather
forecast depending on system settings. The outdoor weather option under
menu > settings > display > outdoor weather has to be ON and outdoor
temperature is set to either Internet (AccuWeather) or sensor.
Press on the weather section of the Home screen to display detail
information concerning local weather. The weather displayed is also
dependent on the user correctly adding the home info. Go to menu >
settings > home info and verify or add the home information.
If only the outdoor sensor is to be used, go to outdoor temperature and set to
sensor.
NOTE - If Internet and weather provider are selected, weather information will
only be displayed once the iComfort S30 Smart Thermostat has been setup
and connected to the Internet.

SETTINGS

The setting screen will allow the homeowner to connect to their home Wi-Fi
router and give their system a name. See list of settings for options.
settings
settings
wi−fi local
wi−fi local
smart away name upstairs on
feels like away off
off
fan auto
Feels Like off
heat & cool
fan
auto
humidity
heat & cool
humidity
iHarmony zoning
notifications
iHarmony zoning
notifications
general
advanced settings
display
general
home info
display
account
home info
account

WI-FI

This is for connecting the iComfort S30 Smart Thermostat to a secure home
wireless network.
NOTE - A router with Bonjour capabilities is required for this function. Check
the router functions if Smart Hubs do not connect. Apple Bonjour
implementation of zero-configuration networking (Zeroconf), a group of
technologies that includes service discovery, address assignment, and host
name resolution.
NOTE - Never use a home guest account. Never use an open router
connection (non-secure). Always use a secure connection physically located
in the home where the thermostat is located.
7
®
is an