1-8. Removal of Fan Motor
1. Unscrew the 6 screws (A) and remove the Rear
Jack Panel.
Screw (B)
Screws (A)
2. Disconnect a connector P105 (C)
3. Unscrew the screw (B) and remove the Fan Motor.
Notes:
When remove the Rear Jack Panel, the connector
(a) which combines the Mother Board with Rear
Jack Panel is disconnected.
Check
the connector has been connected
securely when Rear Jack Panel is installed.
(a)
Connector P105 (C)
DIS-4