Software & Pld Version; Software Version & Check Sum - Panasonic DVCPRO50 Service Manual

7-2. SOFTWARE VERSION & CHECK SUM could be displayed on the counter
display (Front Panel)
7-2-1. SOFTWARE VERSION
1. Press the "PLAY" and "STOP" button simultaneously, then software version is displayed on the front
panel.
2. Press the "PLAY" button together with "STOP" button so that the each item of software version is
displayed step by step. (refer to below)
7-2-2. CHECK SUM
1. SOFTWARE VERSION is displayed when press the PLAY and STOP button simultaneously.
2. Press REW button in addition to the PLAY and STOP button so that the CHECK SUM of the software is
displayed.
SYS SV (Servo)
("DIF" is not displayed if IEE1394 board is not installed.)
PLAY + STOP + REW
SYS 102
DV DIF
SUM * * * *
INF-11
I/F