Error Rate Display - Panasonic DVCPRO50 Service Manual

8. ERROR RATE DISPLAY

Condition : 1) Set to Service menu.
2) Set the TCG SW to INT REGEN or INT PRESET.
The error rate is displayed on the AUDIO LEVEL METER in Service menu mode.
(When enters in Service menu mode, the AUDIO LEVEL METER changes into the error display mode
automatically.)
1. DVCPRO 50
DVCPRO 25
DV
2. DVCPRO 50 / DVCPRO 25 : RP HEAD
1) Enter into the RF adjustment menu and select RP HEAD.
2) The error rate is displayed on the AUDIO LEVEL METER.
The error rate is displayed and measured on the AUDIO
PB HEAD
LEVEL METER at the first page (main screen) of Service
PB HEAD
menu mode (refer to figure 8-1)
RP HEAD
SERVICE-MENU
NO. AOO
* A00 : SERVO ADJUST
B00 : RF ADJUST
C00 : VIN ADJUST
D00 : VOUT ADJUST
F00 : VIDEO ADJUST
G00 : AUDIO ADJUST
H00 : OTHER ADJUST
IOO : BACKUP RAM INIT
END
Figure 8-1
INF-12