Cleaning Method; Cylinder Head Cleaning Method:(Daily); Cylinder Lead Cleaning Method:(Weekly); A/C Head Cleaning Method:(Weekly) - Panasonic DVCPRO50 Service Manual

6. Cleaning Method

Note: Turn the power OFF during cleaning.
Make sure the power is OFF before cleaning.
Use ethanol (more than 99% purity) as cleaning
liquid.
6-1. Cylinder Head Cleaning
Method: (Daily)
1. Turn power off.
2. Dip cloth into De-natural Alcohol.
3. Press cleaning cloth gently against Cylinder Head.
Using an applicator on the top edge of the Upper
Cylinder, rotate the Cylinder counter-clockwise
several times to clean.
4. Repeat cleaning procedure until all residue is
removed from Cylinder Head.
6-2. Cylinder Lead Cleaning
Method: (Weekly)
Don't touch a head chip. Clean the drum lead with a
pick.
Upper Cylinder
Lower Cylinder
6-3. A/C Head Cleaning Method:
(Weekly)
Wipe the A/C head with a cloth dipped in cleaning
liquid. Wipe again with a dry cloth.
6-4. Pinch Roller and Capstan Shaft
Wipe the Pinch Roller and Capstan with a cloth
dipped in cleaning liquid.
6-5. Post Cleaning Method:
Wind a cloth on a pick. Wipe each posts with that pick.
Wipe again with a dry cloth. For metal posts wipe with
a cloth dipped in cleaning liquid. Then wipe it again
with dry cloth.
Head
Lead
Notes :
Use the clean cloth for cleaning purpose. Do not use
any dirty cloth.
The cleaning cloth can be ordered as spare parts.
The part number is indicated as below.
CLEANING CLOTH : VZZ0095
INF-9
Cleaning Method: (Weekly)
(Weekly)
Thin
stick