Software Version Display - Panasonic DVCPRO50 Service Manual

7. SOFTWARE VERSION DISPLAY

7-1. SOFTWARE & PLD VERSION could be displayed on the VIDEO SUPER
OUT.
1. Turn on the power.
2. Press the STOP , EJECT and DIAG button simultaneously, then the HOUR METER display is shown on
the monitor.
3. PUSH Search button in order to change the screen as below ;
DIAG-MENU PLD VERSION
4. Rotate Search Dial to move the position of " * " mark so that the display (SOFTWARE VERSION & PLD
VERSION) on the front panel is changed.
HOUR METER SCREEN
SOFT VERSION SCREEN
PLD VERSION SCREEN
DIAG-MENU
* SYSAV
SERVO
DV
D-I/F
I/F
( "D-I/F" is not displayed if IEE1394
board is not installed.)
* F1 AUDIO
F2A V IN
F2B A PROC
F3A SDI
F3B D-I/F
F4 REC PB
F5 V OUT
F6 SYSCON
F7 SERVO
SOFT VERSION
n1.02
n1.02
1.02
n1.02
n1.02
Figure 7-1-1
VSI*****
VSI*****
VSI*****
VSI*****
VSI*****
VSI*****
VSI*****
VSI*****
VSI*****
Figure 7-1-2
INF-10