Network Connections; Default Network Settings; Wired Connection Procedure - Omron HD-1500 Assembly Instructions Manual

3-3

Network Connections

Wireless and wired networks are available on the AMR. The wired network is typically used for initial
configuration and troubleshooting. The wireless network is typically used during normal operation and
can also be used for maintenance and troubleshooting. Use the information in this section to configure
the network settings of the AMR.
3-3-1

Default Network Settings

The default network settings and functions associated with the Maintenance Ethernet Port on the Op-
erator Panel are described in this section.
The Maintenance Ethernet Port automatically assigns an IP address to the connected PC.
Precautions for Correct Use
Consult your network systems administrator before using SetNetGo to change any default set-
tings. Refer to the Fleet Operations Workspace Core User's Manual (Cat. No. I635) for informa-
tion about modifying network settings.
Additional Information
Access to the SetNetGo Web Interface is always enabled and accessible with the Maintenance
Ethernet Port and does not require a password or a software license.
The AMR's network has the following default configuration. Your network administrator should review
this information for compatibility with your existing network.
Network Class
Netmask for all ports
Permanent Maintenance Ethernet Port IP address
Ethernet negotiation method
Network method
Identifier (SSID)
Security method
3-3-2

Wired Connection Procedure

Use the following procedure to establish a wired connection to the AMR.
Make the following considerations before beginning this procedure.
• A Cat-5 Ethernet cable is required.
• A PC with an available RJ45 Ethernet port is required.
1
Connect the Ethernet cable from the PC to the AMR Maintenance Ethernet Port.
2
Verify the PC network settings by accessing the network adapter properties on your PC for the
network that will be used as the AMR connection.
HD-1500 Platform Assembly Instructions (18407-150)
Item Setting
Class C
255.255.255.0
169.254.10.15
Auto-MDIX
Access Point (AP)
Wireless Network
Unsecured
3 Installation
3
3-5