Network Without Dhcp Server; Geardiscovery > Configuration Setting > Default; Figure 2-4. Configuration Setting - NETGEAR FS526T User Manual

Network without DHCP server

1. Connect FS526T to your existing network.
2. Power on FS526T by plugging in power cord.
3. Install GearDiscovery Utility program on your computer.
4. Start GearDiscovery Utility. (Default IP is 192.168.0.239. Chapter 4 has detailed instructions on the GearDiscovery Utility)
5. Click Discover for the GearDiscovery program to find your FS526T switch. You should see a something similar to Figure 2-1.
6. Click on Configuration Setting (See figure 2-4).
Note: You can always assign a Static IP address to your FS526T whether or not your network has a DHCP server.
GearDiscovery > Configuration Setting > Default

Figure 2-4. Configuration Setting

Page 11 of 58