CHAPTER 2: Getting Started
This chapter will walk you through the steps to start managing your FS526T switch. This chapter will cover how to get started in a network with a
DHCP server (most common) as well as if you do not have a DHCP server.
Network with DHCP server:
1.
Connect FS526T to a DHCP network.
2.
Power on FS526T by plugging in power cord.
3.
Install GearDiscovery Utility program on your computer
4.
Start GearDiscovery utility. (Chapter 4 has detailed instructions on the GearDiscovery utility)
5.
Click Discover for the GearDiscovery to find your FS526T switch. You should see a something similar to Figure 2-1.
GearDiscovery > Discover
Figure 2-1. GearDiscovery Utility Main Screen
Page 8 of 58