NETGEAR FS526T User Manual page 56

4. Modify Default VLAN group (VLAN ID = 1) to apply two new VLAN groups:
The specific ports above have the following Port VLAN ID settings:
Default VLAN: Port 7 – Port 26 (all U),
VLAN 1: Port 1 (U), Port 2 (U), Port 3 (T),
VLAN 2: Port 4 (U), Port 5 (T), Port 6 (U),
5. The following scenarios will produce results as described below:
(1). If an untagged packet enters Port 1, the switch will tag it with a VLAN tag value 10. The packet will have access to Port 2 and Port 3. The
outgoing packet will be stripped away its tag becoming an untagged packet as it leaves Port 2. For Port 3, the outgoing packet will leave as a
tagged packet with a VLAN tag value 10.
(2). If a tagged packet with a VLAN tag value 10 enters Port 3, the packet will have access to Port 1 and Port 2. If the packet leaves Port 1 and/or
Port 2, it will be stripped away its tag becoming an untagged packet as it leaves switch.
(3). If an untagged packet enters Port 4, switch will tag it with a VLAN tag value 20. The packet will have access to Port 5 and Port 6. The outgoing
packet will be stripped away its tag becoming an untagged packet as it leaves Port 6. For Port 5, the outgoing packet will leave as a tagged packet
with a VLAN tag value 20.
VID = 1
VID = 10
VID = 20.
Page 56 of 58