Switch> Statistics; Figure 5-15. Switch> Statistics - NETGEAR FS526T User Manual

Switch> Statistics
The Statistics Table shows the statistics types for one port over time.
ID:
o
Tx:
o
Rx:
o
Tx Error:
o
Rx Error:
o
Packets are counted as TX Error if they:
•
Had a late collision detected during the transmission (512 bit-times into the transmission).
•
Experienced 16 failed transmission attempts due to collision.
•
Were dropped due to lack of resources.
Packets are counted as RX Error if they:
•
Were less than 64 bytes or greater than 1522 bytes.
•
Had a bad FCS.
•
Were dropped due to lack of resources.
Switch> Statistics> Refresh
Click Refresh to obtain current statistics data.
Switch> Statistics> Clear Counter
Click Clear Counter to start new statistics over time.
The port number on the switch
Transmitted packet/s.
Received packet/s.
Transmitted packet/s with an error.
Received packet/s with an error.
Figure 5-15. Switch> Statistics
Page 36 of 58