Chapter 5: Web Management Access; Figure 5-1. Web Management Login Page - NETGEAR FS526T User Manual

CHAPTER 5: WEB MANAGEMENT ACCESS

Your NETGEAR Model FS526T 26-Port 10/100 Mbps Smart Fast Ethernet Switch with Gigabit Ports provides a built-in browser interface that lets
you configure and manage it remotely using a standard Web browser such as Microsoft Internet Explorer or Netscape Navigator. This interface also
allows for system monitoring of the Switch. The help page will cover many of the basic functions and features of the switch and its web interface.
Web Management requires either Microsoft Internet Explorer 5.0 or later or Netscape Navigator 6.0 or later.
Note: Only one user can be logged in at any time.
There are 3 menu options available:
System
o
Switch
o
Firmware
o
There is a Help Menu in the top of right side of screen. Click the help to read the full Help Menu. On some pages, there is a Help button. If you
click that button, you will go to the part of the Help Menu that discusses that page.
Within the various browser interface pages, there are several buttons that you can use. Their names and functions are below:
Refresh:
Apply:
Add:
Browse:
Delete:

Figure 5-1. Web Management Login page

Pulls that screen's data from current values on the system
Submits change request to system and refreshes screen data
Adds new entries to table information and refreshes screen data
Locates a certain path for a desired file.
Deletes selected entries from table and refreshes screen data
Page 22 of 58