System; System> Switch Status; Figure 5-2. System> Switch Status: Switch Status - NETGEAR FS526T User Manual

Factory Reset:
Help:

System

There are 4 options available:
Switch Status
o
IP Access List
o
Set-up
o
Password
o
System> Switch Status
System> Switch Status
The top part of this page displays switch information, such as:
Product Name: (NETGEAR FS526T)
o
Firmware Version
o
Protocol Version
o
DHCP: (shows if enabled or disabled)
o
IP Address
o
Subnet Mask
o
Default Gateway
o
MAC Address
o
System Name
o
Location Name
o
Login Timeout:
o
System Up Time
o
These parameters are not editable from this screen. Only System Name and Location Name can be modified in the Set-up> System Setting page.
Restore the system factory default value.
Goes to relevant section of Help Menu
Figure 5-2. System> Switch Status: Switch Status
Page 23 of 58