PVID Setting
All untagged packets entering the switch will by default be tagged with the port's Primary VLAN Identification (PVID). This screen allows you to
specify the PVID for each port.
Take VLAN 2 for example: ports 5, 6, 7, and 8 have been checked as tagged ports for this VLAN. You must change the PVID value from "1" to "2"
for those ports to avoid losing untagged packets when they are received.
Under the VLAN ID drop down menu, select PVID Setting. See below for an example of setting PVID for VLAN 2.
o
Change the PVID value of ports 5, 6, 7, and 8.
o
Click Apply.
o
Figure 5-24. Switch> VLAN Setting> Tag VLAN: PVID Setting
Page 44 of 58