Figure 5-17. Switch> Vlan Setting> Port-Based Vlan: Add Group - NETGEAR FS526T User Manual

Change members
Click a VLAN ID as shown in Figure 5-16
o
Click to select port/s for VLAN members
o
Click Apply to activate the new setting
o
Add Group
Click Add Group as shown in Figure 5-16
o
Enter a description for this VLAN group
o
Click to select port/s for VLAN members
o
Click Set all to select all ports
o
Click Clear all to unselect all ports
o
Click Apply to activate the new setting
o
Figure 5-17. Switch> VLAN Setting> Port-based VLAN: Add Group
Page 38 of 58