Table of Contents
Advertisement
GS748T Software User Manual
6. Make a note of the displayed IP address assigned by the DHCP server. You will need this
value to access the switch directly from a web browser (without using Smart Wizard
Discovery).
7. Select your switch by clicking on the line that shows it. Then click on the Web Access button.
The discovery utility displays a login window similar to the following:
Figure 2-2
Use your web browser to manage your switch. The default password is 'password'.
Network without DHCP Server
This section describes how to set up your switch in a network without a DHCP server, and is
divided into the following tasks:
•
Manually assign network parameters for your switch
•
Configure the NIC settings on the host PC
•
Log in to the web-based switch management utility
2-2
Getting Started—Smart Wizard Discovery
v2.0, April 2007
Advertisement
Table of Contents
