Figure 5-21. Switch> Vlan Setting> Tag Vlan Menu - NETGEAR FS526T User Manual

From the page as shown in Figure 5-21, you can create a new VLAN, add new ports to an existing VLAN, remove ports from an existing VLAN or,
delete a VLAN.
Add a port to a VLAN Group
Under the VLAN ID drop down menu, select the VLAN you want to edit.
o
Click the box below the port number so that a 'T' (tagged) or 'U' (untagged) appears.
o
Click Apply.
o
Remove a port from a VLAN Group
Click the box again until a blank box appears. This will remove VLAN membership from the port.
o
Click Apply.
o
Note: The default PVID of all ports is 1; therefore, you cannot remove any ports for the default Tag VLAN. It means that before removing any
desired port from default Tag VLAN, changes PVID of such desired port to the PVID other than 1.
Figure 5-21. Switch> VLAN Setting> Tag VLAN menu
Page 41 of 58