NETGEAR FS526T User Manual page 53

The example given in this section will step through a more elaborate setup illustrating all possible scenarios for a comprehensive understanding of
tagged VLANs.
Example
This example demonstrates several scenarios of VLAN use and how the switch will handle Tagged and Untagged traffic.
Please see the following figure for detail setting.
1)
Setup the following VLANs: VLAN 10, 20.
2)
Configure the VLAN membership. Each figure below shows a different VLAN to be setup. Be sure to set all of them as follows.
1.
Setting up first VLAN group, VLAN ID = 10:
Page 53 of 58