Honda HRG416C1 Manual page 48

dummyhead dummyhead
RECOIL STARTER ROPE REPLACEMENT
Remove the recoil starter (page 7-2).
Pull the starter rope [1] until the starter rope is pulled
out fully.
To prevent the starter reel [1] from rewinding, hold the
starter reel to the starter case [2] with a band or
equivalent material [3] as shown.
Untie the knots of the starter rope [1] at the starter grip
side and the starter reel side, and remove the starter
rope.
Pass the starter rope through the starter grip [2] and
make a slip knot [3] at the end of the rope.
Pass the other end of the starter rope through the rope
hole [4] in the starter case and through the rope hole [5]
in the starter reel, and make a slip knot at the end of the
rope.
STARTING SYSTEM
[2]
[3]
[4]
[3]
[1]
[1]
[5]
[2]
[1]
7-3