Honda HRG416C1 Manual page 17

SERVICE INFORMATION
ENGINE
BREATHER TUBE
Insert the breather tube to the crankcase
cover until the paint mark on the tube aligns
with the edge of the brake assembly.
Paint mark
TUBE CLIP B8
Attach the clip at 5.0 ± 3.0 mm
(0.20 ± 0.12 in) from the tube
edge with the clip ends facing
down.
2-6
FUEL TUBE
FUEL TUBE
(160 mm)
(110 mm)
TUBE CLIP B12
Attach the clip at 5.0 ± 3.0 mm
(0.20 ± 0.12 in) from the tube
edge with the clip ends facing
down.
BREATHER TUBE
90 °
TUBE CLIP B12
Attach the clip at 5.0 ± 3.0 mm
(0.20 ± 0.12 in) from the tube
edge with the center of the clip
ends within the range shown.