Stop Method At Occurrence Of Alarms/Warnings - Mitsubishi Electric MELSERVO-J5 User Manual

Stop method at occurrence of alarms/warnings

The servo motor stop methods at alarm occurrence are as follows: forced stop deceleration, stop with dynamic brake, and
stop with electronic dynamic brake. For the servo motor stop method of each alarm number, refer to the following manual.
MR-J5 User's Manual (Troubleshooting)
Forced stop deceleration
The servo motor stops with the dynamic brake after forced stop deceleration.
3
Stop with dynamic brake
The servo motor stops with the dynamic brake without forced stop deceleration. For a servo amplifier without the dynamic
brake, the servo motor coasts.
Stop with electronic dynamic brake
When a specific servo motor is used, the servo motor stops with the electronic dynamic brake without forced stop
deceleration. When other than the specific servo motor is used, the servo motor stops with dynamic brake.
For the specific servo motors, refer to "Precautions relating to the dynamic brake characteristics" in the following manuals.
MR-J5 User's Manual (Hardware)
MR-J5D User's Manual (Hardware)
3 BASIC FUNCTION
159
3.16 Alarm function