Alarm History [B]; Alarm History [A] - Mitsubishi Electric MELSERVO-J5 User Manual

Alarm History [B]

The No. of the alarm that has occurred and the time at which it occurred can be recorded in the history. In the alarm history,
the latest 16 alarms are recorded so that the types of alarms that have occurred in the past can be checked.
The alarm history can be cleared with [Pr. PC21.0 Alarm clear history selection], on the alarm display of MR Configurator2, or
by using the transient command of the optional data monitor function.
Method for checking with MR Configurator2
1.
Connect the servo amplifier and a personal computer and select "Alarm Display" from "Diagnosis" in MR Configurator2.
2.
The alarm display shows the alarm No., detail number, accumulated time after power-on, and actual time.
Method for checking with the optional data monitor function
Refer to the following.
Page 422 Transient command

Alarm history [A]

The No. of the alarm that has occurred and the cumulative power-on time can be recorded in the history. In the alarm history,
the latest 16 alarms are recorded so that the types of alarms that have occurred in the past can be checked.
The alarm history can be cleared with [Pr. PC18.0 Alarm clear history selection] or on the alarm display of MR Configurator2.
Method for checking with MR Configurator2
1.
Connect the servo amplifier and a personal computer and select "Alarm Display" from "Diagnosis" in MR Configurator2.
2.
The alarm display shows the alarm No., detail number, accumulated time after power-on, and actual time.
Method for checking on the servo amplifier display
Refer to "Display sequence" in the following manual.
MR-J5-A User's Manual (Introduction)
3 BASIC FUNCTION
158
3.16 Alarm function