When Recording - Sony MDS-S500 Instruction Manual

Machine Translated by Google
4 Turn the AMS knob (press ./> on the remote
control repeatedly) to select the level of the
input signal, and then press the AMS knob
or YES. Select in the range of –72dB to 0dB
(2dB unit). It is set to -50dB at the time of
shipment.
5 Press MENU / NO.
z Supplementary information on how to
number songs • When recording a CD or MD digitally
In the following cases, only one song number may be added to
the entire recorded part. -When recording one song with the
same disc repeatedly, such as by repeating one song-When
recording the same song number on different discs in
succession
tree
-Some CD players or multi-disc players
When recording from a layer In
either case, separate the songs after recording (page 31). •
Recorded music is less than 4 seconds (stereo, LP2 stereo)
E, when recording in monaural), or when it is 8 seconds or
less (when recording LP4 stereo), the song number may not be
added.
• When recording from an analog sound source without setting
auto track marking, or when digitally recording DAT or
satellite transmission, the entire recorded part is treated as
one song, so only one song number is used for the entire
song. Is not attached. • When digitally recording DAT or
satellite broadcasts
When the sampling frequency of the input signal changes, a new
song number is automatically added regardless of the auto track
marking setting.
z You can also add a song number after recording.
For details, see "Separating songs" (page 31).
Notes •
Even if the power of this unit is turned off or the power plug is
unplugged, the auto track marking settings are remembered. •
Even if "T.Mark L Sync" is turned off, the song number may be
added when the smart pace and auto cut are turned on. If the smart
space autocut is also turned off, the song number will not be
added.
Convenient function

when recording

Automatically erases silent
parts during recording (smart
space / auto cut)
When the input signal is interrupted during recording, the
silent part that has been recorded can be automatically
erased. The operation of this unit changes depending on
the length of the input signal interruption.
If the smart space signal
is re-introduced within 30 seconds of the interruption, the
recorded silence is automatically erased with about 3
seconds between songs, and the recording continues.
When this feature is working
"Smart Space" is displayed.
If more than 30
seconds have passed since the auto-cut signal was
interrupted, the recorded silence will be automatically
erased with about 3 seconds between songs, and the
recording will be paused. When this feature is working,
you will see "Auto Cut".
AMS
x
With
FROM
MENU/NO YES
Continue to the next page
17