Play Md; Reproduce - Sony MDS-S500 Instruction Manual

Machine Translated by Google

Play MD

Reproduce

`/1
PHONE LEVEL knob
1 Turn on the system stereo (or
amplifier)
2 By switching the system
stereo (or amp) input
Select "MD"
3 Press the? / 1 (power) switch on this
unit to turn on the power . The
STANDBY lamp turns off.
4 Insert MD
5 If you want to start playing a song in the
middle, turn the AMS knob (press the ./
> on the remote control repeatedly ) and
select the song number. If you want to
start playing from the first song, this
procedure is not necessary. Proceed to step 6
stomach.
6 Press N.
Playback starts.
22
Slot AMS N
7 Adjust the volume with the
system stereo (or amp)
Basic operation during playback
Operation in such cases
Stop playback Press x. Pause playback
Press X. Press it again to resume
Go one song ahead
The beginning of the song being
played or the previous song
Take out MD After stopping playback
zLP2 or LP4 When you reproduce a stereo recorded MD,
select the song number in step 5 above, and the MDLP
indicator will light up.
You can listen using z headphones.
Connect to the PHONES terminal. Adjust the volume
with the PHONE LEVEL knob.
z You can check the song title during playback (only when the
song title is attached).
Press SCROLL to display the song title and scroll. If you
press it again while scrolling, it will stop scrolling, and if
you press it again, it will scroll again.
regeneration.
Turn the AMS knob to the
right (press> on the remote
control).
Turn the AMS knob
counterclockwise (press. On
the remote control).
Press A.