Table of Contents
Advertisement
Machine Translated by Google
Other information
How to handle MD
The MD is stored in a cartridge so that it can be easily
handled without worrying about dust and fingerprints.
However, dirt or warpage of the cartridge may cause
malfunction. Please note the following so that you can enjoy
the beautiful sound forever. • If you try to force the shutter
open, it may break. If the shutter opens, close it immediately
without touching the internal disc directly. • Be sure to attach
the label attached to the disc to the indentation for
attaching the label. The shape of the label depends on
the disc.
Position to
put the label
Placement Do not place
in places with high temperature or high humidity such as in
direct sunlight.
Regularly clean the cartridge
with a dry cloth to wipe off any dust or debris on the surface
of the cartridge.
44
System constraints
The MD (MiniDisc) system records in a different way than
traditional cassettes and DATs. As a result, there are some
system restrictions that may result in the following symptoms:
Please note that these are not malfunctions.
Even if you haven't reached the maximum recordable time
In MD systems where "Disc Full" is
displayed, "Disc Full" is displayed when the number of
songs is full, regardless of the time. You cannot record more
than 256 songs. To add more songs, delete unnecessary
songs or record them separately on the second MD.
Even though there are plenty of songs and recording time
"Disc Full" is displayed If a lot of
information such as enhancement information is turned on
and off during a song, it will be treated the same as a song
shutter
break, and "Disc Full" will be displayed regardless of the time
or number of songs.
The remaining time of MD does not increase no matter
how many short songs are erased When displaying the
remaining time of MD, the part of 12 seconds * or less (in
stereo mode) is ignored, so the time is added even if the
short songs are erased. It may not be done.
* When recording in stereo. (Approximately 24 seconds for monaural and LP2
stereo recording, approximately 48 seconds for LP4 stereo recording)
If the total of the time recorded on the MD and the
remaining time does not match the maximum
recordable time , one cluster (about 2 seconds *) (in
stereo mode ) is usually recorded in the smallest unit. Even
if it is not enough, it uses a space of 2 seconds * minutes.
Therefore, the actual usable time is reduced. Also, if there is
a scratch on the MD, that part will be deleted automatically,
which will reduce the time required.
* When recording in stereo. (Monaural, LP2 stereo recording
4 seconds for time, 8 seconds for LP4 stereo recording)
Advertisement
Table of Contents
