Table of Contents
Advertisement
Machine Translated by Google
4 While listening to the playback sound, press the AMS
knob or YES at the position where you want to
divide the song. "–Rehearsal–" is displayed, and
the song is played repeatedly for a few seconds
from the position where you pressed the AMS
knob or YES.
If the position where the 5 songs are
divided is played correctly, press the
AMS knob or YES again. When
"Complete!" Is displayed for a few
seconds and disappears, the songs
are separated and the new song starts
playing. The new song has no name.
When not playing correctly While
listening to the sound that is played repeatedly,
turn the AMS knob (press the ./> on the remote
control repeatedly) to adjust the position where the
songs are divided, and then press the AMS knob
or YES. 1/86 seconds (1f (1 frame)) * Shift the
position by each.
* Monaural or LP2 stereo recorded songs are not 2f
For songs recorded in LP4 stereo, the position can be
shifted by 4f.
You can switch the unit of z frames / second / minute. In step
5, if you want to shift the position where the song is divided
by seconds or minutes, press m / M on the remote control
repeatedly . You can switch the unit to go to when you turn
the AMS knob (when you press ./> on the remote control
repeatedly).
Press MENU / NO or x to stop splitting songs .
z You can divide songs during recording.
Use track marking (page 16).
32
Connect songs
ÿCOMBINEÿ
Combine two songs into one song. You can also connect
songs that are far apart. You can also connect the previous
song to the song whose song order is later. Use this when
you want to combine several songs or what you have
recorded with broken frames after stopping many times
into one song. When you connect songs, the song numbers
are automatically renumbered. It is also used to erase
unnecessary song numbers.
Example: Connect the 3rd song to the 1st song
Before
editing the song number
A song B song C song D song
After
B song C song
A song
COMBINE
The name of the song before connecting will be the name of
the song that was connected.
1 During stop, play, pause,
Press MENU / NO
The "Edit Menu" is displayed.
2 Turn the AMS knob (Rimo)
Repeatedly press. /> on the
computer to display
"Combine?" And press the
AMS knob or YES.
D song
Advertisement
Table of Contents
