Recording A Cd - Sony LBT-DR330 Operating Instructions Manual

10
Playing a CD (continued)
To Do this
Stop plavback Press @.
Pause Press C>OE (or Hon the remote).
Press C> Pb again to resume
playback (or CD B™ on the
remote).
Select a track During playback or pause, turn
the jog dial clockwise (to go
forward) oer counterclockwise (to
go backward) and release it when
you reach the desired track.
Or press AMS* BP (to go
forward) or AMS Ke (to go
backward) on the remote.
Find a point Press and hold PP or 4 du ring
in a track playback, and release at the
desired point.
SelectaCD Press one of the DISC 1 - DISC 5
buttons (or DISC SKIP).
Play only the Press PLAY MODE repeatedly
CD you have until "1 DISC" appears.
selected
Play allCDs Press PLAY MODE repeatedly
until "ALL DISCS" appears.
Remove or Press PUSH OPEN.
change the
CDs .
Adjust the Turn VOLUME (or press
volume VOL +/- on the remote).
* AMS: Automatic Music Sensor
Tips
¢ Pressing [Il while the system power is off
automatically turns on the system and starts CD
playback if there is a CD on the tray (One Touch
Play).
¢ You can switch from another source and begin
playing a CD just by pressirtg C>I1, one of the
DISC 1 - DISC 5 buttons, or CD B on the remote
(Automatic Source Selection).
¢ If there is no CD in the player, "NQ DISC"
appears in the display.
* You can change the CDs which are in the loading
position during playback.
Recording a CD
— CD Synchro Recording
This function lets you easily record from a
CD to a tape. You can use TYPE I (nermal)
tapes. The recording level is automatically
adjusted.
1/ (Power) 7 1 <Jl of
pny 23 4 5
1 Press PUSH & and insert a blank
tape into deck B.
With the side you want to
record on facing forward
Sein
2 Press PUSH OPEN and place a CD.
With the label
side up.
When you play
a CD single,
place it on the
inner circle of
the tray.