Table of Contents
Advertisement
Machine Translated by Google
Is it a malfunction? If you think
If something is wrong with the unit, first remove the
power plug, then reconnect the power plug, and then
check the items below. If it still does not work, contact
the store where you purchased the product, Sony
service counter, or Sony consultation counter (back
cover).
stomach.
Do not accept operations.
c The MD is dirty or damaged. Replace with a new
MD.
I can't play it. c
Condensation (water droplets adhere to the inside of the main body)
vinegar. Take out the MD and leave it on for 1 to
several hours.
c Turn on the power. c Check
the connection with the amplifier and operate it correctly.
c Insert according to the direction of the MD arrow
Please.
c Contains a new MD. Has been recorded
Please replace it with the MD.
There is a lot
of noise. c Charge and separate from the TV, etc.
I can't record. c
MD is in the erasure prevention state. Move the
erasure prevention knob to close the hole.
c Check the connection with the sound
source. c Press INPUT and select the sound source correctly
stomach.
c Increase the recording level. c Replace
with a recording disc. c Replace with a recording
disc that has sufficient remaining time. Or, delete
unnecessary songs. c If the power cord is unplugged
during recording or a power failure occurs
If this happens, you may not be able to record the
contents of the recording. Please re-record from the
beginning.
46
A message and 3- or 5-digit alphanum characters are
displayed alternately in the display window. c The self-
diagnosis display function is working. Take action by
looking at the table on page 47. If none of the
above actions work properly, remove the power plug
and then plug it back in again.
Advertisement
Table of Contents
