Sony MDS-S500 Instruction Manual page 30

Machine Translated by Google
Erase part of the song (AB Erase)
You can easily erase that part by specifying the range you want to
erase in one song. This is convenient for erasing only unnecessary
parts after recording satellite broadcasts or FM broadcasts.
Example) When erasing a part of B song
1
Before
editing the song number
A song B song a
1
A-B
A song B song A + C song
After ERASE
1 During stop, play, pause,
Press MENU / NO
"Edit Menu" is displayed.
2 Turn the AMS knob (Rimo)
Press. /> on the computer
repeatedly) to display "AB Erase?",
And press the AMS knob or YES .
Playback starts.
3 Turn the AMS knob until the song
number of the song you want to
erase is displayed (press ./ > on
the remote control repeatedly).
4 While listening to the playback sound, press
the AMS knob or YES at the start point
(point A) of the part you want to erase.
"–Rehearsal–" and "Point A ok?" Are displayed alternately,
and the playback is repeated for a few seconds until point
A.
30
point A point B
2
B song i B song c
2
3
5 If point A has been played correctly,
press the AMS knob or YES
again. "Point B set" is displayed,
and playback for setting point B
starts.
When point A is not playing correctly Turn
the AMS knob (press the ./> on the remote
control repeatedly ) while listening to the sound
that is played repeatedly to adjust point A, and
3
then press the AMS knob or YES. 1/86 seconds
(1f (1 frame)) * Shift the position by each .
6 Continue playback (or press M on the remote
control ), and when you reach the end point
(point B) of the part you want to erase,
press the AMS knob or YES. "AB Ers" and
"Point B ok?" Are displayed alternately. The
part of the joint where the AB is erased (a
few seconds to the point A and a few
seconds from the point B) is played
repeatedly.
7 If point B is playing correctly, press the AMS knob
or YES again. When "Complete!" Is displayed
for a few seconds and disappears, the space
between points A and B disappears and
playback starts from the beginning of the
song. ..
When point B is not playing correctly
Turn the AMS knob (press the ./> on the remote
control repeatedly ) while listening to the sound
that is played repeatedly to adjust point B, and
then press the AMS knob or YES. 1/86 seconds
(1f (1 frame)) * Shift the position by each .
* Monaural or LP2 stereo recorded songs are not 2f
For songs recorded in LP4 stereo, the position can be shifted
by 4f.