Sony MDS-S500 Instruction Manual page 16

Machine Translated by Google
Add song numbers
during recording (track marking)
There are two methods, one is to attach it yourself and the other is to
attach it automatically. Adding a song number is convenient when you
want to find the beginning of a song or perform editing operations.
Attach by yourself (manual
track marking)
During recording , press z where you want to add
a song number
Automatically attach (auto
track marking)
When digitally recording a CD or MD, the same
song number as the sound source CD or MD is
automatically added. To digitally record other sound
sources, or to automatically add song numbers when
analog recording is performed regardless of the type of
sound source, make the following settings. However, if
there is a lot of noise in the sound source such as tape
or radio, the song number cannot be added automatically.
1 Press MENU / NO while stopped
16
AMS z
MENU/NO YES
2 Turn the AMS knob ( press the ./> on
the remote control repeatedly) to
display "Setup?", And press the
AMS knob or YES.
3 Turn the AMS knob ( press the ./> on
the remote control repeatedly) to
display "T.Mark LSync" and display it.
Press the AMS knob or YES
4 Turn the AMS knob ( press the ./> on
the remote control repeatedly) to
select a setting, then press the AMS
knob or YES.
Select Auto Track
Marking Set to work
Don't work
If you select "T.Mark LSync", L.SYNC lights
up.
5 Press MENU / NO
To set the level of the input signal that is the
standard for auto track marking, after the signal
input below the level set here continues for 1.5
seconds or more, when a signal above the set level is
input again, a new song number Is attached. 1 Press
MENU / NO while stopped.
2 Turn the AMS knob (press ./> on the remote control
repeatedly) to display "Setup?", And press the
AMS knob or YES.
3 Turn the AMS knob (press ./> on the remote control
repeatedly) to display "LS (T)", and then press the
AMS knob or YES.
Settings to choose
T.Mark LSync
(default setting)
T.Mark Off