Table of Contents
Advertisement
Machine Translated by Google
Message display list
When you are using it, you will get an English message
depending on the situation. The meaning of Japanese
is as shown in the table below. See also "Self-diagnosis
function and display list" on page 47.
Message meaning
Auto Cut Auto Cut is working (page 17).
Blank Disc I inserted a recording MD that I just purchased,
Busy NOW! You pressed NET MD during check-in / check-out.
Cannot Edit The program tried to edit in the shuffle playback
Check USB USB cable is not connected properly.
CONNECT check-in / check-out
possible because there is no remaining time on the Disc Full!
Impossible Recording or editing operations are not possible.
Incomplete! The recording level was not changed or the fade-
Initialize (lit off)
48
or a recording MD that erased all
songs.
Turn off the Net MD function after the
operation is completed.
state. I also tried to edit an MD that was
recorded in LP2 or LP4 stereo.
It is carried out. (If an invalid operation
is performed at this time, "CONNECT!"
Will be displayed.) Recording is not
MD ("System Control", page 44).
in / fade-out operation was not performed
correctly after recording due to vibration
of the main unit, scratches on the disc,
or dirt. This unit does not remember the
settings of the setup menu. Also, the
content recorded last time is not correctly
recorded on the MD. Also, this unit does
not remember the playback status when
it was used last time . (When the power
is turned on by pressing the? / 1 (power)
switch, it blinks for about 4 seconds.)
Name Full! The number of characters in the song title and disc name has
reached the upper limit. You can only enter up
to about 1700 characters.
Net MD
The Net MD function is turned on. (If
you perform an invalid operation at this
time, "Net MD!" Will be displayed.)
No Change When changing the recording level after recording,
the AMS knob or YES was pressed
without changing the recording level, so
the recording ended without rewriting.
Disc no
MD is not included.
No Name No name.
Premastered Recording is not possible with commercially available MD
software. Also, commercially available MD
software cannot be edited.
An invalid key was pressed while Push STOP! MD was
operating. After stopping, operate again.
S.F Edit!
An attempt was made to perform another
operation while SF EDIT (change
recording level after recording, fade-in /
fade-out) was in progress.
No other operation can be performed while SF
EDIT is running.
SF Edit NOW You pressed the? / 1 ( power ) switch while
performing SF EDIT (change the
recording level after recording, fade in /
fade out) .
If the power is turned off while SF EDIT is
running, rewriting will not end normally.
Turn off the power after rewriting is
completed.
Smart Space Smart space is working (page 17).
Step Full! The programmed song has reached the maximum
value and cannot be programmed any more.
stomach.
Immediately after inserting the Reading MD, the recorded
information is being read into this unit.
To.
Some songs, such as songs checked out on a Tr Protected
Net MD device, cannot be operated
because the songs are protected.
Advertisement
Table of Contents
