Table of Contents
Advertisement
Machine Translated by Google
Synchronized recording with
a Sony CD player
(CD synchronized recording) Z
When recording from a Sony CD player, you can easily
synchronize recording by operating the CD player with the
remote control of this unit. Since the remote control of this
unit operates both this unit and the CD player, keep the CD
player close to this unit.
Note
With some CD players, CD sync recording may not be
possible with the remote control of this unit. In this case, use
Music Sync Recording (page 20) to perform synchronized
recording between the CD player and this unit.
` / 1
A
H X
1 Turn on the sound source you want to record and the system
stereo (or amplifier), and select "CD". 2 Perform steps 3 to
5 (page 13) of "Recording".
3 Insert the CD into the CD player and select the playback method.
4 Press CD SYNCHRO STAND BY.
The CD player is paused for playback, and the unit is in
the recording standby state.
5 Press CD SYNCHRO START. The unit will start
recording and the CD player will start playing. During
recording, the number of the song being recorded and the
elapsed time of that song are displayed.
When the CD player does not start playing On
some CD players, pressing CD SYNCHRO START
may not start playing. Press X on the remote control
that came with your CD player to start playback.
CD SYNCHRO START
CD SYNCHRO STANDBY
CD SYNCHRO STOP
Operation during CD sync recording
In such a case, stop recording .
Press CD SYNCHRO STOP.
Press CD SYNCHRO STAND BY to pause recording .
Resume a paused recording
Press CD SYNCHRO START.
You can also use the remote control that comes with the zCD
player.
Press button Operation of this unit Operation of CD player
H recording
x
Recording Pause Pause
X
Recording Pause Pause
z How to add song
numbers • When a CD player is connected to the digital
optical input terminal, the same song number as the CD
is automatically added. • A CD player is connected to
the analog input terminal
If you do, you can automatically add song numbers in the
Auto Track Marking settings (page 16). • If you pause and
then resume recording, the song number will change
regardless of the auto tracking setting.
z You can change the CD during recording.
1 Press x on the remote control that came with your CD player.
vinegar.
2 Replace the CD.
3 Use the remote control H that comes with the CD player.
push.
Recording will resume.
You can also record in sync with a video CD player. Press
the number button 2 while pressing the? / 1 (power) switch
on the remote control of this unit to enable synchronized
recording with a video CD player.
To return to the state of synchronized recording with a CD
player, hold down the? / 1 (power) switch and press the
number 1.
Notes •
When recording with a CD player with a mode selector, set
the mode selector of the CD player to "CD1". • Some
CD players and multi-disc play
When recording in sync with Yar, there may be only one
song number for the entire recorded part.
reproduction
21
Advertisement
Table of Contents
