Sony MDS-S500 Instruction Manual page 18

Mini disc deck
Table of Contents

Advertisement

Machine Translated by Google
To set up the smart space and autocut function, follow
the steps below.
1 Press MENU / NO while stopped.
2 Turn the AMS knob (press ./> on the remote control
repeatedly) to display "Setup?", And press the
AMS knob or YES.
3 Turn the AMS knob (press ./> on the remote control
repeatedly) to display "S.Space On", and press
the AMS knob or YES.
4 Turn the AMS knob (press ./> on the remote control
repeatedly) to select the setting, and then select the setting.
Press the AMS knob or YES.
S.Space On (default
setting) that
automatically activates smart space and
Don't work
5 Press MENU / NO.
Notes •
If you start recording with no signal input, smart space and
autocut will not work regardless of the settings. • The song
number may not change before and after the smart space
is activated.
• The smart space and auto cut settings are the same. You
can't work just one or the other.
• The settings are memorized even if the power of this unit is
turned off or the power plug is unplugged. • Recording will
stop automatically if the recording paused by auto cut
continues for about 10 minutes.
Monitor the input sound
(source monitor)
You can monitor the signal from each input terminal
without recording.
1 Press A to eject the MD
18
Settings to choose
auto cut
S.Space Off
2 Press INPUT repeatedly to select the
sound source you want to monitor.
3 Press z
• When "A-IN" is selected for INPUT The signal
input from the analog input terminal is A / D
converted and output to the digital optical
output terminal. The signal is further D / A
converted and output from the analog output
terminal and PHONES terminal. At this time,
"AD --DA" is displayed.
• When "D-IN" is selected for INPUT The signal
input from the digital optical input terminal is
output to the digital optical output terminal
through the sampling rate converter. The
signal is further D / A converted and output
from the analog output terminal and PHONES
terminal. At this time, "-DA" is displayed.
Press x to stop the source monitor .

Advertisement

Table of Contents
loading

Table of Contents