Squaring Stock For Jointing - Grizzly G0958 Owner's Manual

Squaring Stock for
Jointing
Squaring stock means making it flat and paral-
lel along both length and width, and making the
length and width perpendicular to one another.
The purpose of squaring stock is to prepare it for
accurate cuts and construction later on.
A properly "squared up" workpiece is essential for
tasks such as accurate tablesaw cuts, glue-ups/
laminations, cutting accurate bevels on a band-
saw, and many other applications where one sur-
face of a workpiece is used to reference another.
Items Needed
Jointer ................................................................ 1
Planer ................................................................ 1
Table Saw .......................................................... 1
Squaring stock involves four steps performed
in the order below:
1. Surface Plane on Jointer—Concave face of
workpiece is surface planed flat with jointer.
2. Surface Plane on a Thickness Planer—
Opposite face of workpiece is surface planed
flat with a thickness planer.
Previously Surface
Planed Face
Model G0958/G0959 (Mfd. Since 05/22)
3. Edge Joint on Jointer—Concave edge of
workpiece is jointed flat with jointer.
4. Rip Cut on a Table Saw—Jointed edge
of workpiece is placed against a table saw
fence and opposite edge cut off.
Qty
Previously
Jointed
Edge
-31-