QUASAR 125-180
3.7
CRANKCASE - CRANKSHAFT
3.7.1
REMOVING THE CRANKSHAFT
"
Remove piston, see 3.2.23 (REMOVING THE PISTON).
"
Remove the complete oil pump, see 3.4.1 (REMOVING THE OIL PUMP).
"
Remove the starting system, see 3.6.1 (REMOVING THE STARTING
SYSTEM).
"
Remove the oil pump gear and the drive chain, see 3.4.1 (REMOVING THE
OIL PUMP).
"
Loosen and remove screw (1).
"
Gently tap with a rubber hammer on the right casing (2) to separate it from
crankshaft (3).
"
Loosen and remove screw (4) on lower chain sliding shoe (5).
"
Remove lower chain sliding shoe (5).
"
Using special tool ("Gear puller" part no. 8910601), remove kick-start pedal
gear (6).
"
Gently tap with a rubber hammer on the crankshaft (3) from outside the left
casing and remove the complete crankshaft (3).
Release 00/2003 - 09
2
4
5
6
6
3
ENGINE
1
3
- 43 -
00