Table of Contents
Advertisement
1. Loosen the thumbscrew.
2. Remove the tab from the power adapter bracket.
3. Slide the power adapter out of the power adapter bracket.
Note: See Configuration Installation Guide for the DIN rail configuration and wall-mounted
configuration installation details if necessary.
Figure 73. Power adapter removal
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Top cover replacement
Use the following information to remove and install the top cover.
Remove the top cover
Use this information to remove the top cover.
To avoid possible danger, read and follow the following safety information.
S012
.
Chapter 5
Hardware replacement procedures
87
Advertisement
Table of Contents
