Table of Contents
Advertisement
• Youku:
http://list.youku.com/albumlist/show/id_50483444
Remove the screws of the adapter retainer and remove the retainer.
Step 1.
Remove the screw of the adapter.
Step 2.
Grasp the PCIe adapter by its edges and carefully pull it out of the slot.
Figure 28. PCIe adapter removal
Table 19. PCIe adapter installation
Adapter retainer
1
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the PCIe riser assembly
Use this information to install the PCIe riser assembly.
To avoid possible danger, read and follow the following safety statement.
• S012
CAUTION:
Hot surface nearby.
Before you install the PCIe riser assembly, complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• Chapter 4 "Hardware removal, installation and management guidelines" on page 27
2. Turn off the server. Disconnect the power cords and all external cables (see "Turn off the server" on
page 32).
3. Install the required adapters.
4. Remove the filler if it is installed.
ThinkAgile MX Certified Node Small FactorThinkAgile MX1021User Guide
50
Advertisement
Table of Contents
