Table of Contents
Advertisement
Step 2.
Lower the PCIe riser assembly into the chassis and press the PCIe riser assembly down until it is
securely seated.
Step 3.
Install the seven screws.
Figure 31. PCIe riser assembly installation
After you install the PCIe riser assembly, complete the following steps:
1. Install the node if needed (see "Install a compute node" on page 58).
2. Reconnect power cords and all external cables.
Air baffle replacement
Use the following information to remove and install the air baffle.
Remove the air baffle
Use this information to remove the air baffle.
To avoid possible danger, read and follow the following safety statement.
• S012
CAUTION:
ThinkAgile MX Certified Node Small FactorThinkAgile MX1021User Guide
52
Advertisement
Table of Contents
