Table of Contents
Advertisement
Install the PCIe riser assembly
Use this information to install the PCIe riser assembly.
To avoid possible danger, read and follow the following safety statement.
• S012
CAUTION:
Hot surface nearby.
Before you install the PCIe riser assembly, complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• Chapter 4 "Hardware removal, installation and management guidelines" on page 27
2. Turn off the server. Disconnect the power cords and all external cables (see "Turn off the server" on
page 32).
3. Install the required adapters.
4. Remove the filler if it is installed.
a. Remove the three screws.
b. Grasp the filler by its edges and carefully lift it out of the server.
Figure 64. Filler removal
To install the PCIe riser cage, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-A25P7vBoGa_wn7D7XTgDS_
• Youku:
http://list.youku.com/albumlist/show/id_50483444
.
Chapter 5
Hardware replacement procedures
79
Advertisement
Table of Contents
