Table of Contents
Advertisement
Step 1.
Open the latch to remove the dust filter holder out of the locking bezel.
Figure 48. Dust filter removal
Step 2.
Remove the dust filter out of the locking bezel.
Figure 49. Dust filter removal
If you are instructed to return the defective component, please package the part to prevent any shipping
damage. Reuse the packaging the new part arrived in and follow all packaging instructions.
Install the dust filter in locking bezel
Use this information to install the dust filter in locking bezel.
Before you install the dust filter in locking bezel, complete the following steps:
1. Read the following sections to ensure that you work safely.
• "Safety" on page iii
• Chapter 4 "Hardware removal, installation and management guidelines" on page 27
.
Chapter 5
Hardware replacement procedures
65
Advertisement
Table of Contents
