4. Advanced Printing
Disabling "Higher" Security
1.
Press [Security].
2.
Enter the security code using the number keys, and then press [OK].
The lock is canceled. You can pull out the master unit and drum unit.
• Under this option, security can only be disabled temporarily and resumes automatically when
following occurs:
• the present print job finishes
• you return the master eject unit to its original position after pulling it out
• you close the front cover after pulling out the drum unit and returning it to its original position
• a certain period passes, during which neither the master eject unit nor the drum unit was
pulled out, following security function cancellation
• you press the [Start] key
• the machine enters the or Auto Off mode
• the machine enters the Auto Reset mode
Setting Security Timer
You can set the time that shifts to the security mode automatically. See page 149 "System Settings".
126