Ricoh C280 Manual page 179

Message
"Set original."
"Maximum quantity: ####"
"Minimum quantity: ####"
"Drum Unit is not set correctly."
"Communication error has
occurred. Turn the main power
switch off then on."
"Print image is larger than the
selected paper size. Change
paper size."
Causes
• You have not changed the
original on the exposure
glass before pressing the
[Start] key.
• Original is not placed.
The number of prints exceeds
the maximum print quantity.
The number of prints does not
exceed the minimum print
quantity.
-
-
The master image previously
printed is larger than the paper.
The image exceeds the paper
size.
If the Machine Does Not Work as Required
Solutions
• Place the next original on
the exposure glass or in
the ADF.
• Place your originals.
You can change the maximum
number of prints that can be
made in one operation with
User Tools. For details, see
page 155 "Master Making /
Print Settings".
You can change the minimum
number of prints that can be
made in one operation with
User Tools. For details, see
page 155 "Master Making /
Print Settings".
Slide in the drum until it clicks.
Make sure that the drum is
completely set in position.
Turn the main power switch off
and on.
If the message appears again,
contact your service
representative.
Make prints after pressing [Exit]
and selecting the paper size
again.
If you press [Exit] to erase the
message and press the [Start]
key, the machine starts to make
the prints. However, the image
might not fit on the paper.
177