Table of Contents
Advertisement
5. User Tools
Master / Ink Remaining Volume
Paper Type
Paper Type: User1 – 2
Master Cut Length
Double Feed Warning
*1 Default settings of No. of Idling Rotations: Auto Quality Start are follows.
Temperature
*1
Low Tmp.
Normal Tmp.
*3
High Tmp.
*1 (Below 19 °C or 66.2 °F)
*2 (19 – 29 °C, 66.2 – 84.2 °F)
152
Item
Specifies whether you can check the amount of ink and
master.
[Off]: You cannot check the remaining amount of ink or
master.
[On (Below half)]: When the remaining amount of ink or
master is less than half, the display panel indicates these
amounts when you turn on the main switch.
Default: [Off]
You can select the paper type.
Default: [Standard]
You can register a frequently used paper type and have it
shown on the paper type menu as [User 1] or [User 2].
Default: [Standard: No Feed]
The machine determines the master length according to the
number of originals placed in the optional ADF and the
paper sizes. If you wish to use A3, 11 × 17 master
regardless of the number of originals set and the paper
sizes, select [A3].
Default: [Auto]
Specifies whether a warning is displayed or not when a
double feed is detected.
Default: [Off]
0 – 4 hours
4 – 24 hours
0
*2
0
0
Description
Time period
24 – 72 hours
7
7
5
5
5
5
Over than 72 hours
7
5
5
Advertisement
Table of Contents
