Table of Contents
Advertisement
1. Getting Started
Always adjust the position with the lock lever for the paper feed side plates in the raised position
(lock released).
4.
Align the paper and load it onto the paper feed tray.
Correct any paper curl before setting the paper. If you cannot do so, stack the paper with the curl
face down.
5.
Make sure that the paper feed side plates are touching both sides of the paper, and then
push the lock lever for the side plates down to lock the side plates into position.
Always make sure that you push the lock lever for the side plates down to lock the side plates into
position.
Make sure that the paper size and orientation in the display panel correspond with the actual
paper size and orientation set on the paper feed tray.
36
ACY008S
ZDCY041E
Advertisement
Table of Contents
