Ricoh C280 Manual page 155

*3 (Over 29 °C or 84.2 °F)
To increase the print image density, increase the number of drum rotations, and vice versa.
Interface Settings
For details about network settings, see "User Tools Menu (System Settings)", Network Guide.
Administrator Tools
Item
User Code Management
Key Operator Code
Restricted Access
Description
You can select whether or not to use User Code mode. If
user codes are turned on, users must enter their user codes
before they can operate the machine. The machine keeps
count of the number of copies made under each user code.
User code must registered for User Code Management. For
details, see page 162 "User Code".
Default: [Off]
You can specify whether or not to use key operator codes
to control Administrator Tools settings for access codes.
Default: [Off]
If you select [On], enter the key operator code (max.4
digits) using the number keys, and then select [Partial] or
[All Initial Settings] to set the access limit.
• If you selected [Partial]
A key operator code is only required to access
Administrator Tools for System Settings.
• If you selected [All Initial Settings]
A key operator code is required to access all items in
System Settings, Master Making/Print Settings, and
Online Print Features.
If you select [On], you must enter an access code to access
the Key Operator Code display.
In Key Counter mode, you have to set the key counter
before making prints. (To turn on Key Counter mode,
contact your service representative.) If Key Counter mode is
on, Restricted Access is turned on automatically. If you turn
Restricted Access off, you can make prints without inserting
the key counter.
Default: [Off]
User Tools Menu
153