Setting Items On The Sysmac Studio And The Setting Targets - Omron NJ Series Startup Manual

A-2 Setting Items on the Sysmac Studio
and the Setting Targets
The correspondances between the items in the Multiview Explorer of the Sysmac Studio and each
hardware are provided below.
If you select new_Controller_0 for the device in the Multiview Explorer, the settings for a sequence
control program of a Robot Integrated CPU Unit, and if you select RobotControlSettings, the settings
for a V+ program of a Robot Integrated CPU Unit are made.
Refer to the manual for the specific product for details.
Setting items in the MultiView Explorer
Sysmac Studio
NJ-series Robot Integrated System Startup Guide (O049)
Setting target
Robot Integrated CPU Unit
Sequence control program
Robot control parameters
V+ program
Robot setting files
Appendices
A
A-21