Omron NJ Series Startup Manual page 75

This allows you to edit the name of the sequence control program.
2
Enter the name of the sequence control program.
The name of the sequence control program is changed.
3
Double-click the section to edit.
The variable table and Ladder Editor are displayed in the Edit Pane.
4
Enter the program in the Ladder Editor. Internal and external variables are automatically regis-
tered when they are entered in the program.
To create more than one sequence control program, perform the following steps.
5
Right-click Programs under Programming - POUs in the Multiview Explorer, and then select
Add - Ladder from the menu.
Program0 is added under Programs.
NJ-series Robot Integrated System Startup Guide (O049)
3 Implementation Example of Static Pick-and-place Equipment
3
3-25