Omron NJ Series Startup Manual page 90

3 Implementation Example of Static Pick-and-place Equipment
Additional Information
Align the conveyor top to the U face. Click the +90 Yaw button or +90 Pitch button to change
the orientation of the conveyor.
10
Click the buttons in the following order; +90 Yaw, +90 Pitch, +90 Yaw, +90 Pitch and +90
Pitch
The conveyor top comes to the U face.
11
Select the parts to add for simulation, and click the Next button.
3-40
NJ-series Robot Integrated System Startup Guide (O049)