Sysmac Studio Settings for the
EtherNet/IP Port
NX-series EtherNet/IP Unit User's Manual (W627)
This section describes the EtherNet/IP port settings with the Sysmac Studio.
The EtherNet/IP port settings are made for each NX-series EtherNet/IP Unit that is
connected to the CPU Unit on the Sysmac Studio. Make the EtherNet/IP port settings
on the Sysmac Studio under Configurations and Setup - CPU/Expansion Racks -
CPU Rack: X Bus - Unit No.: NX-EIP201 () - EtherNet/IP Port Settings.
7-1
7-2
LINK Settings Display .................................................................................. 7-10
7-3
SNMP Settings Display ................................................................................ 7-11
7-4
7-5
CIP Settings Display .................................................................................... 7-15
7
7
7-1